Laser Repair Machine
- For the solution of vertical line problem.
- For the solution of horizontal line problem.
- Solution for cross line.
- Solution for Half and horizontal line.
- Solution for Half and vertical line.
- Solution for shorting pixel.
- Solution for jumping picture.
LCD SCREEN LASER REPAIR MACHINE
LCD Panel Repair Laser Machine
LCD laser repair machine (referred to as laser machine) on the LCD screen repair industry
accounted for the high-end repair technology, the most high-end technology of LCD screen repair, LCD screen repair industry in addition to the COF loose welding, TAB char (This error can be repaired with a binding machine) Others such as ITO break, short line, bright line, half-line, dotted line, a multi-line laser machine can be used to repair. Laser machine with high efficiency, fixed rate, low cost (the same fault in the laser machine does not need replacement parts, (and do not affect the repair rate), it is widely used as the main device screen repair of large-scale production factory, after sale and service company.
Laser repair purposes, is hoping to further the defective part to be corrected, so that the original
filter out waste products to be discarded, repair to an acceptable product. The current acceptable
product standards—-Firstly is definitely not wired defects; secondly, many products are “no highlights assurance”. So the pixel cannot have been glowing are bright spots, but to some extent accepted few dark spots. Therefore, the object of laser repair, based on the main line defect and highlights.
This “LCD Panel Repair Laser Machine” is equipped state of art control system from research and
development including Laser Head ( HOYA Laser Controller), using MITUTOYO precision optical imaging system (laser processing / observing special microscope, laser processing special optical lens, image observation objective lens), X / Y / Z motor drive system, Electronic control systems, Gas pressure cushioning system, Composed of precision steel base and other .This equipment can be given work piece material layer for short-circuit defect repair process. Work piece to use manual mode.
| Project | Main parameters | Remarks |
| Laser System | Laser-Type: LD. Laser | Dermae |
| Product Model: Dy Laser-20mw | ||
| Wave Length：1064nm/532nm Ir/Gr | Optional | |
| Pulse Width：8ns
Frequency：1-20hz Mpo：30uj |
||
| Output Stability：±10% | ||
| Light Spot Pattern: Square
Adjustable Rectangle Rotating |
Optional | |
| Minimum Light Spot ：0.8um*0.8um
Under 50x Objective Lens |
||
| Adjustable Range Of Light Spot Size： 50x Max-24um*24um Min-2.5um*2.5um 20x Max-60um*60um Max-3um*3um | ||
| Microscope Imaging System | Product Model: Ewin Lens – 4 | |
| Imaging Lens : IR/Gr Antireflection Film | ||
| Switchover Of Objective Lens: Electric
CCD Brand ：Vatek |
Japanese Brand | |
| Objective Lens：5x（Apo）10x（Apo) 20x（Nir）50x ( Nir)
Imaging Lens : IR/GR Antireflection Film |
||
| CCD Pixels：500,000 Pixels | ||
| Displayer：17inches 1920*1080 | ||
| Brand Of Image Capture Card ：Maiet | Dermae | |
| Software System | Manual Adjustment Laser Intensity Infrared Counterpoint | |
| Rack Construction | Material: Sheet Metal Steel | |
| Dimensions:L1560mm*W1400mm*H1700mm | ||
| Workbench Size：890mm*1540mm | ||
| XY Axis Travel：1200mm*630mm | ||
| Z Axis Travel：100mm | ||
| XYZ Axis Translational Speed: High
Speed≥10mm/S Low Speed：2mm/S Manual Fine-Tuning：0.25mm/260 Degree XYZ Axis Translational Precision：±0.02mm |
||
| XYZ Axis Fine-Tuning: Manual | ||
| Surface Of Workbench: High Strength Glass Pad | ||
| XY Axis Motor: Manual | ||
| Z Axis Motor: Manual | ||
| Z Axis Guide Rail: Oil Free Guide | ||
| Brand Of Guide Rail Screw: Within
V15 P-Level Double Guide Ball Screw Rod Outlook Paint Color: Turquoise |
||
| Cantilever Beam Structure: Marble | ||
| Displayer Fixing ：Adjustable On Back And Forth | ||
| Shock Absorption: Cushion Suspension Shock |
| Electrical part | Keypad function：1. four micro-lens switching
2. four speed levels switching 3. XYZ axis coarse tuning, fine tuning 4. Light source brightness adjustment 5. Power switch 6. Launch button 7. Laser energy compensation rotary knob(with cover） 8. Emergency stop Emergency stop switch and alarm light on the door 9. Input power: single-phrase AC 220V 50- 60Hz |
Contact & Location Info
📍 WeFix.lk
📌 No. 12 Keyzer Street, Colombo 11, Pettah, Sri Lanka
📞 Call/WhatsApp: +94 757 000028
☎️ Landline: +94 112 323 812
🌐 Website: https://wefix.lk
Important: Confirm Before Ordering
To ensure perfect compatibility and avoid returns, please send us a clear photo of your TV main board or TV model number sticker. Our technical team will verify compatibility within minutes.
Tested Products
Every board is tested before shipping
Warranty Support
30-day warranty on all products
Technical Assistance
Free installation guidance
Original Parts
Genuine components guaranteed
